PE Kanalisation und Formteile von Wavin

AS+ Kanalisation und Formteile von Wavin

Silent-PP-Rohre und Formteile von Geberit

T-Stück DN 110 sammeln

Rohre und Formteile von Ostendorf Kunststoffe HT Safe

Silent-Pro combined corner branch fitting 87.5°, swept-entry, right

Silent-Pro combined corner branch fitting 87.5°, swept-entry, left

Silent-Pro duct branch fitting 87.5°, swept-entry, right

Silent-Pro duct branch fitting 87.5°, swept-entry, left

Silent-Pro parallel branch fitting 45°

Silent-Pro combined branch fitting 87.5°, swept-entry

Silent-PP combined corner branch fitting 87.5°, swept-entry, right

Silent-PP combined corner branch fitting 87.5°, swept-entry, left

Silent-PP duct branch fitting 87.5°, swept-entry, right

Silent-PP duct branch fitting 87.5°, swept-entry, left

Silent-PP parallel branch fitting 45°

Silent-PP combined branch fitting 87.5°, swept-entry

PE Kanalisation und Formteile von Geberit

Silent PE-dB20 pipes and fittings by Geberit

90° 3-way ball branch

90° 4-way ball branch

135° 3-way ball branch

Rohre und Formteile von Valsir® HDPE

POLO-KAL 3S Pro

RAUPIANO Rohre von REHAU

Rohre und Formteile von Valsir® Blackfire®

Rohre und Formteile von Valsir® Silere®

Rohre und Formteile von Valsir® Triplus®

Rohre und Formteile von Valsir® PP3/PP

Valsir® PP3/PP

Rohre und Formteile von Ostendorf Kunststoffe KG System

Pipes and fittings from Marley Solvent Waste

Rohre und Formteile von Ostendorf Kunststoffe KG 2000

Pipes and fittings from Marley Pushfit Soil

Pipes and fittings from Marley Solvent Soil

Rohre und Formteile von Ostendorf Kunststoffe Skolan Safe

Pipes and fittings from Marley Pushfit Waste

Kanalisationsrohre und Formteile von BLÜCHER

Straight fitting

Straight fitting

Long bend for trap connection

Long bend for trap connection

Bend with cap for trap connection

Bend for trap connection

Ventilation branch

Shaft branch right

Parallel branch

Unilateral double branch max flow

Kit with nut for manifolds

ABS inspection pipe with oval access

Derivation clamp for multilayer systems

Straight fitting with cap

Elbow fitting with extension

Fitting with bend

T-piece

BackFlip bend

BottomTurn bend

Roth Thermaset Verteiler

Roth RIS Comprehensive drinking water and heating installation with the Roth pipe installation system

Firenze trap with access

Double increaser

87°30’ corner branch

Parallel branch

Bend for trap connection with cap, without grommet

Bend for trap connection with cap, without grommet

Grey bend with right inlet

Grey bend with two inlets

Grey bend with left inlet

87°30’ bend with front inlet with seal

Back to back connector for trap with caps

SKOLANsafeEP Corner branch left

SKOLANsafePA Parallel branch

Inner reducer 110/50 centric

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Single bracket for EASY LOCK modular manifolds. Made of zinc plated steel. Two different sizes: DN 20 or DN 25.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Single bracket for EASY LOCK modular manifolds. Made of zinc plated steel. Two different sizes: DN 20 or DN 25.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Modular plain manifold EASY-LOCK series. Manifolds can be used to supply DCW. The body is made of brass CW617N nickel-plated only externally. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 100°C. Maximum operating pressure: 10 bar. Main connections: G 3/4"F or G 1"F. Secondary connections: EUROK or 1/2"M or 1/2"M TP (flat seal). Sizes available: from 2 to 4 ways.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Modular plain manifold EASY-LOCK series. Manifolds can be used to supply DCW or DHW. The body is made of brass CW617N nickel-plated only externally. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 120°C. Maximum operating pressure: 10 bar. Main connections: G 3/4"F or G 1"F. Secondary connections: EUROK or 1/2"M or 1/2"M TP (flat seal). Sizes available: from 2 to 4 ways.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Plastic box with bottom for modular manifolds (without fastening kit, to order separately). H: from 350 to 400 mm. W: from 350 to 800 mm. D: from 90 to 95 mm. With/without protection for plastering operations.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Orientable terminal for EASY LOCK modular manifolds complete with drainage valve and automatic air vent valve. Material: nichel plated brass. Size: M 1/2".

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Plastic box with bottom and fastening kit for coplanar and modular manifolds. Two different sizes: DN 20 or DN 25.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Modular plain manifold EASY-LOCK series. Manifolds can be used to supply DHW. The body is made of brass CW617N nickel-plated only externally. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 100°C. Maximum operating pressure: 10 bar. Main connections: G 3/4"F or G 1"F. Secondary connections: EUROK or 1/2"M or 1/2"M TP (flat seal). Sizes available: from 2 to 4 ways.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Modular plain manifold EASY LOCK series. Manifolds can be used to supply DCW or DHW. The body is made of brass CW617N nickel-plated only externally. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 100°C. Maximum operating pressure: 10 bar. Main connections: G 3/4"F or G 1"F. Secondary connections: EUROK or 1/2"M or 1/2"M TP (flat seal). Sizes available: from 2 to 5 ways.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Double bracket for EASY LOCK modular manifolds. Made of zinc plated steel. Axle spacing: 200 mm. Two different sizes: DN 20 or DN 25.

Manifold with 8 connections

stadsuitloop

Generische Kopplung mit Leckflansch

Für WC-Elemente Geberit Kombifix, Sanbloc, Duofix und GISeasy

T-Stück

Boden Rohr 90 Grad

Venting bend

Triplus Gully 110

Ventilation Branch 110

Back flow preventing valve with locking lever

Triplus Multibranch 110

Ventilation branch

90° 4-way ball branch