Ventilation ducts and fittings, Safe line by Velu

Econox Underfloor Ducts

Air valves by Solid Air

Underfloor ventilation ducts and fittings by Velu

Rectangular and circular VAV boxes

Air Terminals of Zehnder

Econox Flexible Hoses

Econox Thermoduct Terminal

Econox Thermoduct

Econox Rectangular Air Duct

Econox Spiral Ducts

Air valves by Trox Technik

Wavin introduces Ventiza, an air distribution system made of impact-resistant PVC that is very easy and quick to install. The system can withstand the pouring of concrete and is small enough to be mounted in a suspended ceiling. The low wall roughness leads to less noise pollution, less dirt deposition and less friction losses. Ventiza is a new step in Wavin's mission to create indoor climate solutions that meet today's challenges.

Ventilation ducts and fittings by Bergschenhoek

Air terminals of Waterloo

Ventilation flexibles and fittings by HyBalans

Valve for supply air

Valve for exhaust air

Air valves by Halton

Waterloo Valves

Fire Dampers by Rf-Technologies

Vent-Axia

Ventilair

Ventilation equipment of Inatherm

Ventilation valves by HC Barcol-Air

Ventilation ducts, fittings and accessories

Ventilation ducts and fittings by Ubbink

Equipment of Zehnder

The new ventilation product line from DYKA AIR.

Grills of Inatherm

Aldes Terminal for Ventilation

Air terminals by Halton

Grilles of Trox

Roof feed through fittings, WTW 3000 line by Burgerhout

Axial fans of Vortice

Terminals of Ventiline

Flexible ventilation ducts and fittings, Ventichape line by Ventiline

A combination between a flexible collapse and a construction system by Ventiflex of Ventiline

Grilles of Solid Air

Fire resistant grills by Rf-Technologies

Ventilation equipment of Carrier

Flue gas products from Burgerhout

Fan Coil Units by Biddle

Air terminals from HC Barcol-Air

Grille on Duct

Grille on Duct

Air Terminal Overflow Standard

Air Terminal Overflow Perforated

The PRxMIOO is solely the perforated face from the PTxMI, and suitable for overflow.

The RRBD is the return version of, and is the same as the RTBD in appearance.

The RRBM and RRTB are the return versions of, and are the same as the RTBM and RTBT in appearance.

The RTBD is a flower-shaped swirl diffuser, type: surface-mounted. The swirl technology creates an extremely stable supply-air pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room The smaller versions of the RTBD can be supplied as a poured concrete diffuser. Most important features: - Suitable for heat-pump systems (VRV/ VRF) with extremely low supply-air temperatures - Suitable for low rooms - Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

The RTFO is a conical swirl diffuser, type: surface-mounted, which gives the diffuser a more open appearance. The diffuser is easy to fit by means of one central screw in the separately supplied plenum. The same diffuser is used for supply and return. Most important features: - Simple and quick assembly - Highly inductive - Suitable for heat-pump systems (VRV/ VRF) with extremely low supply-air temperatures A clamp ring can be supplied as an accessory that enables you to fit the diffuser quickly and easily, without any tools, into a flat ceiling plate. Swirl diffusers are extremely suitable for variable volume systems.

The RTBC is a surface-mounted diffuser in round shape. The swirl technology creates an extremely stable inflow pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room Most important features: - Suitable for heat-pump systems (VRV/ VRF) with extremely low supply-air temperatures - Suitable for low rooms - Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

This is the same diffuser as the RTFO Supply, but has been made suitable for Revit return systems

The RTLD is a louvre-faced diffuser with a pure radial spread pattern. The diffuser is easy to adjust from a horizontal to a more vertical spread pattern. Most important features: - Up to extremely large air volumes - Can also be fitted free-hanging - Adjustable interior The diffuser can also be fitted in walls.

The PRxD is the return version of,and is the same as the PTxD in appearance.

The PTxD is suitable for large air volumes with large temperature differences in respect of the room The diffuser contains air-direction elements that enable you to modify the supply-air direction afterwards. Most important features: - Highly inductive - High number of air changes achievable - Pure radial spread pattern This diffuser series is also suitable for Baopt control systems.

The PTxMI is considered to be the basic diffuser for modular ceilings. The diffuser is applied frequently by architects when they design buildings. The diffuser is fully perforated, which creates a beautiful aesthetic fit. Most important features: - Highly inductive - High number of air changes achievable - Pure radial spread pattern This diffuser series is also suitable for Baopt control systems.

The RTFM is a conical swirl diffuser, type: t-bar mounted. The diffuser is easy to fit by means of one central screw in the separately supplied plenum. The same diffuser is used for supply and return. Most important features: - Simple and quick assembly - Highly inductive - Suitable for heat-pump systems (VRV/ VRF) with extremely low supply-air temperatures Swirl diffusers are extremely suitable for variable volume systems.

The RRBC is the return version of, and is the same as the RTBC in appearance.

The RTBM and RTBT ares a flower-shaped swirl diffusers, type: t-bar mounted. The swirl technology creates an extremely stable inflow pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room. Most important features: - Suitable for heat-pump systems (VRV/ VRF) with extremely low supply-air temperatures - Suitable for low rooms - Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

This is the same diffuser as the RTFM Supply, but has been made suitable for Revit return systems

The PRxMI is the return version of, and is the same as the PTxMI in appearance.

Perforated Standard

Round Diffuser Standard

Round Diffuser Standard

Round Diffuser Standard

Round Diffuser Standard

Round Diffuser Standard

Round Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard

Rectangular Diffuser Standard